|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Oscilent Corporation IF SAW Filter | 813-SL140.0M-08 Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 813-SL140.0M-08 . TYPE : 13.3 x 6.5 SMD Base Station & Repeater Apr 18, 2007 140.0 MHz Bandpass Filter Low Loss Narrow Bandwidth PART NUMBER : 813-SL140.0M-08 .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss at Fo Source Impedance (single ended)* Load Impedance (single ended)* Bandwidth at -1.0 dB Bandwidth at -3.0 dB Bandwidth at -40.0 dB Relative Attenuation: from 10 to 133 MHz from 147 to 280 MHz Amplitude Ripple within fo +/- 3.2MHz Group Delay Variation (Fo +/- 3.2MHz) Absolute Delay at Fo In/Out Return Loss at Fo Minimum 139.6 7.6 8.5 45 45 Typical 140.0 8 50 50 7.9 8.8 13.0 0.6 60 1.0 Maximum 140.4 10 13.8 1.0 100 Units MHz dB ohm ohm MHz MHz MHz dB dB dBp-p nsec sec dB *With Matching Network (Reference Testing Environment Circuit as shown) Modifiy Impedance Values as necessary. . PACKAGE OUTLINE (mm) TEST FIXTURE Oscilent Corporation IF SAW Filter | 813-SL140.0M-08 Page 2 of 2 PIN Description IN-11, OUT-5, GROUND-1,2,3,4,6,7,8,9,10,12 w FREQUENCY RESPONSE Part No.: 813-SL140.0M-08 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map |
Price & Availability of 813-SL1400M-08 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |